Quick Switch of display when changing depth, enlarge, Multi frequency choices and frequency fine tuning function

Features
• Easy and quick gain setting control
– When gain changes are applied, the previous echoes are applied at the same as the new echoes
– Allows to display weakly recorded fish group

• Allows to dispaly weakly recorded fish group
– 30% increase of transmitting speed allows more detailed
fish school to be displayed

• Fine tuning of transmitting frequency
– Fine tuning over all frequencies including low and high
transmitting frequencies

• Progressed image processing technology
– Express image with various filtering process : Interference removal, noise removal, clutter, color removal and digital filter area setting

• Selectable display color
– Use may select preferable color display

• Display area detected on A-SCOPE
– Display area of seabed transmitted by the beam angle from transducer on A-scope to increase ease of work
– Beam angle may vary depending on the frequency of the transducer and
the installation method. The data displayed on the euipment should be used for reference only

• Multi-frequency and the output
– The selection of transducers with various frequencies and output is available
– 28/38/50/68/82/88/107/150/200 kHz
– Dual frequencies
– Transmission output can be selected from 1/1.2/1.5/2.5/3KW
– Connectable with past transducers

• Display white line
– White line applied to easily discern seabed from
the fish school or reef
* Display the strong signal from seabed in the white line in order to easily distinguish between
fish group and seabed

• Digital filter technology
– Digital filter technology applied to display the weakest
echoes from small fish and reduce noise at the same time

Specifications
• General
– Operating Frequencies : Dual Frequencies(50/200 kHz)
– Output Power : 1/1.2/1.5/2/2.5 /3 kW
– Power Reduction : 10 ~ 100 % (in 10 % step)
– User Frequency : 28/38/50/55/68/75/82/88/95/
100/107/150/200 kHz(2 Frequencies selection)

• Display
– Display : 10.4″ color LED (SVGA: 800 x 600)
– Color : 8/16/32/64 color
– Brightness : 500 cd/m2
– Tx Rate : 20 ~ 3000/min
– Pulselength : Standard/Short/Middle/Long
– Rx Band : Narrow/Standard/Wide
– Amplifier : High dynamic range
– Ranges : 3 ~ 3000 m
– Shift : 0 ~ 2000 m
– Display Mode : Single(LF/HF), Dual, Single+Zoom, Custom modes 1,2,
Zoom mode(Bottom lock, Bottom zoom, Marker zoom), MIX mode, Nav data, A-scope
– Picture Advance Direction : Left, Right
– Picture Advance Speed : Stop, 1/16, 1/8, 1/4, 1/2, 1/1, 2/1, 4/1
– Alarms : Audio, Fish, Depth, Water temperature, Nav data
– Others : Auto Mode, Color Erase, Interference, TVG, Clutter,
Temp Graph, A-scope, White Marke

• ENVIRONMENTAL CONDITIONS
– Operating Temperature : -15℃ ~ +55 ℃

• DATA INTERFACE
– Data Interface : NMEA 0183

• POWER SUPPLY
– Power Supply : 12/24 VDC, 50W max.

• EQUIPMENT LIST
– Standard : Display Unit, Transducer(1/1.2/1.5/2/2.5/3KW),
Installation Materials and Standard Spare Parts
– Option : Speed/Temperature Sensor, Temperature Sensor
NMEA Cable, Rectifier